0x00000000
ERROR_SUCCESS
The operation completed successfully.
0x00000000
NERR_success
completed successfully.
0x00000001
ERROR_INVALID_FUNCTION
Invalid function.
ERROR_FILE_NOT_FOUND
0x00000002
The system cannot find the specified file.
0x00000003
ERROR_PATH_NOT_FOUND
The function may not find the specified path.
0x00000004
error_too_many_open_files
The system cannot open this file.
0x00000005
error_access_denied
Access denied.
0x00000006
ERROR_INVALID_HANDLE
The alias is indeed invalid.
0x00000007
ERROR_ARENA_TRASHED
Control barricades destroyed.
0x00000008
ERROR_NOT_ENOUGH_MEMORY
Not enough disk space to resolve this issue
Order.
0x00000009
ERROR_INVALID_BLOCK
The garden control block has an invalid address.
0x0000000A
ERROR_BAD_ENVIRONMENT
Bad environment.
0x0000000B
ERROR_BAD_FORMAT
An attempt has been made to help download the program from
Invalid format.
0x0000000C
ERROR_INVALID_ACCESS
Access by area code is not valid.
0x0000000d
ERROR_INVALID_DATA
Personal details are invalid.
0x0000000E
error_out of memory
Insufficient storage space
operation.
0x0000000f
ERROR_INVALID_DRIVE
The device cannot find the wish you specified.
0x00000010
ERROR_CURRENT_DIRECTORY
The directory cannot simply be deleted.
0x00000011
ERROR_NOT SUCH_DEVICE
file cannot move file to specific volume
disk.
0x00000012
error_no_more_files
There are usually no more files.
0x00000013
ERROR_FROM WRITE
is write-protected.
0x00000014
error_bad_unit
the specified device cannot be found.
0x00000015
ERROR_NOT_READY
The device is not ready.
0x00000016
ERROR_BAD_COMMAND
Electronics does not recognize the command.
0x00000017
ERROR_CRC
Redundancy of data errors (loopback).
0x00000018
ERROR_bad_length
A program is an expanded command, but the size of the command
wrong.
0x00000019
ERROR_SEEK
Motivation cannot define a specific area or simply track it.
hard drive.
0x0000001A
ERROR_NOT_DOS_DISK
The specified hard drive is not available.
0x0000001B
ERROR_SECTOR_NOT_FOUND
Disk can’t find the requested sector.
0x0000001C
error_out_of_paper
The printer is out of paper.
0x0000001D
ERROR_WRITE_FAULT
The system cannot access the specified device.
0x0000001E
READ_FAULT
CurrentlyMy system may not be able to read from the specified device.
0x0000001F
ERROR_GEN_FAILURE
The device connected to the system does not work very well.
0x00000020
ERROR_SHARING_VIOLATION
process is definitely not accessing the file, because, no doubt, it
is being used by an oncoming process.
0x00000021
ERROR_LOCK_VIOLATION
The process simply can’t access the file, which is why the other
the concept is attached to a part of the file.
0x00000022
ERROR_WRONG_DISK
Invalid file is on disk. %2 (volume
insert serial number: %3) into drive %1.
0x00000024
ERROR_SHARING_BUFFER_EXCEEDED
Too many open documents to share.
0x00000026
ERROR_HANDLE_EOF
Go to the end of the most important file.
0x00000027
ERROR_HANDLE_DISK_FULL
Hard drive is full.
0x00000032
error_not_supported
This request will be taken care of.
0x00000033
ERROR_rem_not_list
Windows cannot determine the network path. check this
is this network path correct and therefore the target machine is enabled
not or disabled. If cursorbyte.com can still find the network path, your network cannot resolve
Administrator.
0x00000034
ERROR_DUP_NAME
They were connected not only because there was a name
double online. You go to the control panel in the human body to change the name of our computer.
then try again.
0x00000035
ERROR_BAD_NETPATH
The network path was indeed not found.
0x00000036
ERROR_NETWORK_BUSY
Organization is busy.
0x00000037
error_dev_not_exist
The specified network or resource device no longer exists
available.
0x00000038
ERROR_TOO_MANY_CMDS
Requires a limit on the number of commands in the main BIOS.
0x00000039
ERROR_ADAP_HDW_ERR
A hardware network error has occurred on the card.
ERROR
0x0000003a
_BAD_NET_RESP
The designated server is not often able to perform the requested service
Deal.
0x0000003b
ERROR_UNEXP_NET_ERR
An unexpected network error has occurred.
0x0000003c
error_bad_rem_adap
Remote PC Support Adapter is not compatible in any way.